Draperies - Direct Drive Roller Tracks & Carriers


90 Dual Channel Track

SM Automatic offers the Series 90 Dual Channel Track for pinch pleated draperies, as well as alternative Contemporary pleating styles, often referred to generically as S-fold or Z-fold. Pinch pleated systems utilize 5/8" roller carriers for minimal stacking (which allows the option to hang the draperies below the track, or head up to conceal the track), while roller carriers (9/16") have also been designed for Contemporary pleating applications, which guarantees smooth operation. The aluminum track has a white finish. The maximum length of track without splice is 240". For pinch pleat draperies to cover track, use a pin setting of 1.75". Available as either ceiling or wall mount.

90 Dual Channel Track

 

30 and 40
Assembled direct drive roller tracks include: cut-to-measure track, master carriers, roller carriers (3 per foot are standard, with extra carriers at additional cost), end pulleys, and plastic covered steel cable. Steel tracks are PVC coated inside and out. Roller tracks are also available as cord drawn and hand drawn. Since the draperies hang below the track, a recess or top treatment is strongly suggested. The maximum width of track without splice: 226.5"

30 40

Steel with white finish
Dimensions: 1.19" x .78" (30mm x 20mm)
Deduction for hanging below track: 1.25"
Capacity: 11 lbs. per carrier

Steel with silver gray finish
Dimensions: 1.56" x 1.19" (40mm x 30mm)
Deduction for hanging below track: 1.50"
Capacity: 33 lbs. per carrier

 

Roller Track Master Carriers
90 Track with long arm
overlap master carriers
overlap: 5"
underlap: 3.5"

30 Track with standard
overlap master carriers
overlap: 3.5"
underlap: 3.5"

40 Track with standard
overlap master carriers
overlap: 5"
underlap: 5"

A direct drive system consist of motors and tracks only. All other controls are optional.


Download PDF Installation Instructions | Download PDF Electrical/Electronic Options | FAQs
Trade Downloads | Consumer Downloads